Psiber CT50 CableTool - Multifunction Length & Voltage Meter
Length and Voltage Meter
The CableTool model CT50 from Psiber Data Systems provides contractors, CATV, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables up to a distance of 2500 feet. Using TDR technology, the CableTool diagnoses cable faults with no launch or dead zone and an accuracy to ±2%. Simply select the appropriate cable type from the pre-stored library or enter the cable NVP, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed. Voltage on the wires up to 250v is continuously measured by the built in, true RMS voltmeter and is displayed to warn of a potentially unsafe condition.
Psiber CT50 Features:
- Identifies and finds fast the distance to an Open or Short
- Measures Cable Length in a Box, Spool or Wall
- Transmits Tone Signals for Tracing Hidden Cable Runs
- Measures Voltage to Identifies Live Circuits
- Displays Length in Feet or Meter
Online Price: $299.00
Online Sale Price: $275.00
SHIPS FOR FREE!
Psiber CTK1015 Cable Tracker
The Psiber CTK1015 Cable Tracker is Designed Specifically for Network Maintenance Professionals
The Cable Tracker Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The CableTracker Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing.
Contact Us for The Best Price
Psiber LanMaster 26 - Tests Gigabit, VoIP and Powered Ethernet Ports
The Psiber LanMaster 26 Tests Gigabit, VoIP and Powered Ethernet Ports
The LANMASTER 26 Link Tester provides LAN Installers and Maintainers a tool with the testing capability for Gigabit (1000baseTX) over copper, Fast Ethernet (100baseTX), Standard Ethernet (10baseT) links as well as VoIP/PoE detection.
The LanMaster 26 measures the voltage supplied by the VoIP or PoE port with typical loading to ensure that the voltage level is adequate.
The port ID feature identifies which port on a hub or switch that a wall outlet is connected by flashing the Link light on the connected port.
Online Price: $224.99
Online Sale Price: $199.00
Psiber LanMaster 35 - Power & Link Tester
The Psiber LanMaster 35 is a Essential Tool for Installing and Maintaining Networks
The LanMaster 35 is a new handheld tester used for installing and maintaining Local Area Networks (LAN) using Power over Ethernet (PoE). The LanMaster 35 Power and Link Tester conducts power tests with actual loads to ensure that when a powered device such as a VoIP phone, wireless access point or security camera is connected to the network it will operate properly.
The LanMaster 35 identifies whether power is IEEE 802.3af compliant or a legacy configuration, such as Cisco Inline power, for correctly connecting powered devices. The unit measures Loop Resistance to quickly identify damaged cables and bad punchdowns that cause intermittent problems or equipment malfunction.
The LanMaster 35 provides Link speed and duplex mode testing capabilities for verifying connectivity of a powered or unpowered 10/100/1000BaseTX Link. The unit measures cable length and can be connected to a wall outlet to identify a connected port on a switch or hub.
The LanMaster 35 is an essential tool for installing and maintaining networks that utilize the latest PoE (Power over Ethernet) technology.
- Tests network cable pairs for Power over Ethernet (PoE)
- Identifies the power type as IEEE 802.3af, Cisco Inline or Non-Standard
- Simulates a network device for making power measurements under actual loaded conditions
- Displays voltage, polarity and mid-span or phantom configuration for powered wire pairs
- Identifies damaged cables and bad punchdowns by measuring wiring Loop Resistance
- Detects 10/100/1000 BaseTX Link speed and duplex mode
- Measures cable length and open or short condition
- Provides Port ID function (link light activation) for identifying connected ports
- Applies a tone signal for tracing cables with the CT15 CableTracker Tone Probe
Online Price: $392.99
Online Sale Price: $349.00
Psiber PRO70 PingerPro - Cable and Network Management Pinger Pro for Copper cables
The Psiber PRO70 PingerPro Cable and Network Management Tool brings a new level of connectivity testing with: fault location, Gigabit Ethernet capability, advanced IPv6 support, Logical Link Data Protocol (LLDP/CDP) and a powerful feature set that you will use every day. As a result, the Psiber PRO70 PingerPro is the complete high performance first-response-tool, designed to solve your most frequent network problems. Installing new network drops or devices, monitoring performance or troubleshooting problems, the Psiber PRO70 PingerPro quickly provides answers you need.
The Psiber PRO70 PingerPro color touch panel interface lets you select a configurable AutoTest that provides critical Link information, conducts network connectivity tests, including Ping and Trace Route, and provides switch port information in seconds.
The Psiber PRO70 PingerPro touch screen interface lets syou select discrete tests, or a configurable AutoTest that provides critical Link information; conduct network connectivity tests and provide switch port information in seconds In seconds, the Psiber PRO70 PingerPro provides critical, clear and easy to read answers. Document your test results with a few keystrokes, to prove the job's done right.
The rugged weather resistant design of the Psiber PRO70 lets you test anywhere and a rechargeable battery pack eliminates buying alkaline batteries. Whether you are installing new network drops or devices, monitoring network performance or troubleshooting problems, you can depend on the PingerPro to quickly provide all the answers you need.
- Detects Speed and Duplex of 10/100/1000 base TX Links
- Verifies IP Address Assignment with the DHCP Client Test
- Tests Connectivity Across a LAN/WAN
- Measures Packet Response Time to Determine Network Performance
- Captures the MAC Address of an IP Address
- Transmits Link Activation Signals for Port Identification
- Ultimate Ping Test with Jumbo frames
- IPv4/IPv6 capability
- Fast Auto Test
- Configurable profiles
- Switch Port information (CDP/LLDP)
- Copper connectivity verification capability
- Cable length and fault identification
- Wire Map and tone generator
- Trace route information
- Network device emulation (MAC cloning)
- Power level on Fiber Measurement
- Store hundreds of test results
- Professional Report generator
- Rugged weather resistant case
- Rechargeable Li-ion battery
- Easy touch screen interface
- Multiple language capability
- Built-in on-board help
Psiber CT12 CableTracker Ultra High Power Tone Generator
For IT, Telecom & Cabling Specialists.
The Most Powerful Tone Generator Available
with Up to 10X Higher Output
than Standard Tone Generators.
The Ultra High Power Psiber CableTracker CT12
Tone Generator enables signal detection on
cables miles away and makes hearing a tone
through walls, ceilings and enclosures easier
with a power level far greater than other tone
generators. The amazing 190mWatts of output
power reduces maintenance times by making
it easier to trace and identify cables used in
Network, CATV, Audio/Video, Security and
Telephone applications.
Higher speed data cables require low EMI
leakage which is used for detection by Tone
and Probe Testers. These low leakage levels
have made standard testers ineffective.
The powerful signal transmitted by the CT12 CableTracker 12 and the unique method of
applying the tone allow detection and tracing of
advanced twisted pair cable systems including
many shielded types.
In addition, the Psiber CableTracker 12 produces an
easily identified audio tone signal that rapidly
alternates between two frequencies. The
unit has a continuous run mode and an Auto
power down mode to conserve battery life.
The CableTracker 12 comes with an RJ-45
patch cable for connection to modular jacks
and an RJ-45 to alligator clips adapter for
toning punch down blocks, bare wires or non
terminated cables.
Thousands of network and cabling
professionals have relied on Psiber test tools
for installing, troubleshooting and maintaining
complex, high performance networks and
cabling systems. The CableTracker 12 Tone
Generator is up to 10 times more powerful
than other generators so that users can quickly
and accurately solve the most difficult cabling
installation and maintenance jobs.
Online Price: $87.00
Online Sale Price: $75.00
SHIPS FOR FREE!
Psiber CTK1215 Tone & Probe Kit
The Psiber CTK1215 Tone & Probe Kit is a Ultra High Power Cable Tracing System.
Features
- Ultra High Power with 190 mW of output power
- Two selectable operating modes - Continuous
or Auto power down
- Conection choice - RJ-45 to Alligator Clip
Adapter, or RJ-45 Patch Cable (other options
available)
- Low battery indicator - Tone Generator
- Non-conductive probe tip
- Power “On” indicator - Probe
- Volume Control
Box Content
- CableTracker 12 Tone Generator
- CableTracker 15 Probe
- Carrying Case
- RJ-45 Patch Cable
- RJ-45 to Alligator Clips Adapter
- User Guide
- 9V Batteries
Optional
- RJ-45 to BNC and BNC to F Adapters
- RJ-45 to Bed of Nails Alligator Clips Adapter
Online Price: $159.95
Online Sale Price: $138.00
SHIPS FOR FREE!
