Accessories

Fluke 203406 Replacement Fuse 11A 1000V

Fluke 203414 Fuse 440ma 1000V

The Fluke 203414 fuse fits models: 23-III, 25, 26-III, 27, 77-III, 79-III, 83, 83-III, 85, 85-III, 87(S/N over 65650001), 87-III, 87E-III, 87-IV, 89-IV, 175, 177, 179, 187, 189, 863, 865, 867, 867B.

The Fluke 80PK-1 Bead Probe Type-K Thermocouple is for general purpose applications

Measurement range: -40 to 260°C

One year warranty

The Fluke AC89 Test Clip is a single probe pierces 0.25 to 1.5 mm insulated wire

Small pin allows self-healing of the insulation

CAT IV 600V, CAT III 1000 V, 5 A rating. UL listed

One year warranty

• Snap-on yellow holster absorbs shocks and protects meter from rough handling
• Includes built-in stand and hanger loop
• One year warranty

The Fluke C12A Case is a vinyl, zippered case, 6.8" x 5" x 1.5" with inside pockets and belt loop for convenient carrying.

Compatible Fluke Meters:

Fluke 114 Electrical Multimeter
Fluke 115 Multimeter
Fluke 116 HVAC Multimeter
Fluke 117 Multimeter for Electricians
Fluke 709 / 709H Loop Calibrator

Fluke C90 Soft Case for DMMs and Visual IR thermometers

Compatible products to Fluke C90 Case:

Digital multimeters:
Fluke 110 True-rms Digital Multimeter
Fluke 179 IMSK Industrial Multimeter Service Kit
Fluke 114 Electrical Multimeter
Fluke 115 Field Technicians Digital Multimeter
Fluke 116 Digital HVAC Multimeter
Fluke 117 Electrician's Multimeter with Non-Contact Voltage
Fluke 175 True-RMS Digital Multimeter
Fluke 177 True-RMS Digital Multimeter
Fluke 179 True-RMS Digital Multimeter

IR thermometers:
63 Mini Infrared Thermometer Gun
Fluke 66 Handheld Infrared Thermometer
68IS Intrinsically Safe IR Thermometer

Pressure calibrators:
Fluke 712 RTD Process Calibrator
Fluke 717 Pressure Calibrator

Visual IR thermometers:
Fluke VT04A visual IR thermometer
Fluke VT04 visual IR thermometer electrical combo kit
Fluke VT04 visual IR thermometer HVAC combo kit
Fluke VT04 visual IR thermometer maintenance combo kit

Fluke TL220 SureGrip Industrial Test Lead Set

Fluke Test Lead Set includes:

• AC220 SureGrip� Alligator Clip Set
• TP238 SureGrip� Insulated Test Probe Set
• TL222 SureGrip� Silicone Test Lead Set (right to right)
• One year warranty

The Fluke TL26A Test Lead Set has 5 ways to connect:

• U-shaped nose for blade-shaped terminals
• Notched jaw for gripping screw heads, bare wire or terminals
• Serrated teeth for gripping threaded or wire-wrapped terminals
• Cluster of sharp needles for piercing small gauge (#22-#28 AWG) wires
• Large piercing needle for penetrating larger gauge wires

• The Fluke TL75 Test Lead Set has One pair (red, black) of comfort grip probes
• 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT II 1000 V, , 10 A rating
• CAT IV 600 V, CAT III 1000 V only with protective cap
• CSA listed
• One year warranty

The Fluke TPAK meter hanging solution

• Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet
  
• Combine components to meet most hanging needs
  
• Attaches to back of a 110/170/180 Series meter, 20/70 -III with integrated holster (with adapter), 724/725 and 50 Series II
  
• One year warranty  
  

Fluke C25 Large Soft Case for DMMs

This Fluke Multimeter carrying case is a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke�s popular digital multimeters. It is available with a 1 year warranty.

Recommended for all 20, 50, 70 and 80 Series meters either in or out of their holsters. Also fits 8025A, 8060A/62A and the Fluke PV360.

Fluke Part Number C25

The Ripoffs Holster CO-50FP is suitable for use with the following:

Fluke 83 & 87 Multimeters

Features open side pocket for probes and 7" strap for probes.

Fluke's AC285 SureGrip™ accessory is designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

• One pair (red, black) of large alligator clips with nickel-plated steel jaws
• Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt
• Recommended for use with TL222 and TL224 test leads
• CAT IV 600 V; CAT III 1000 V, 10 A rating.
• One year warranty

The Fluke TL40 Retractable Tip Test Lead Set

• One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm
  
• Extra hard probe tips to provide long service life
  
• Flexible silicone insulated test leads
  
• CAT III 300 V, 3 A rating, UL listed
  
• One year warranty
  

The Fluke TP920 Test Probe Adapter Set

• Set of push-on adapters for TL71 and TL75 test probes
  


• IC test adapters, extended probe tips, medium alligator clips (max.opening 7.6 mm)
  


• CAT III 300 V, 3 A rating
  


• One year warranty
  

Features:

• One pair (red, black) of small, insulated, nickel plated jaws
  
• Blunt tip grabs round screw heads up to 9.5 mm
  
• Recommended for use with TL222 and TL224 test leads
  
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
  
• One year warranty