ADL-HDI-VGA+3.5 HDMI to VGA + Audio Converter

The Pan Pacific ADL-HDI-VGA+3.5 HDMI to VGA + Audio Converter is for newer laptops, computers and tablets that only output an HDMI signal. Our active device can convert from digital to analog. It's much better than most other products that only 'adapt' from HDMI to VGA. Audio is included so you can also enjoy the sound from your speakers.

Micro USB power also eliminates potential power problems if users use tablets or devices that don't provide enough power for units to operate correctly.

No software or driver required. Simply plug and play.

PACKAGE CONTENTS:

HDMI to VGA Converter
User Manual
USB Type A to Micro USB cable (for power)

FEATURES:

Compliant with HDMI 1.3
Support Audio
Support up to UXGA and 1080P

ADL-VGA+3.5-HDI VGA+Audio to HDMI Converter

The Pan Pacific ADL-VGA+3.5-HDI Converter is designed to convert video (analog signal) and audio signals from a PC or Laptop to digital HDMI output up to 1080p.

The VGA to HDMI Converter is a plug and play device, automatically sensing the native resolution of the display and convert the computer's output to a digital signal. The device will detect EDID displays and show the exact resolution. The converter will take the audio signal from the computer and embedded it into the HDMI signal output, so that you are able to enjoy both audio and video through one cable. It supports multiple resolutions up to 1920 x 1080 @ 60Hz.

The VGA to HDMI Converter is USB powered; therefore, it will not require an additional power supply.

Micro USB power also eliminates potential power problems if users use tablets or devices that don't provide enough power for units to operate correctly.

No software or driver required. Simply plug and play.

PACKAGE CONTENTS:

VGA to HDMI Converter
User Manual
USB Type A to Micro USB cable (for power)

FEATURES:

Compliant with HDMI
Support Audio
Support up to UXGA and 1080P

Product No Longer Available - *See ADL-VGA+3.5-HDI-V2 for replacement

Calrad 40-284A HDMI to VGA Video & Audio Converter Cable

Calrad's 40-284A is a simple solution for converting HDMI signals to VGA video & audio. It is a perfect solution for connecting video cards [desktop or laptop] or consumer electronics devices such as game consoles or home theater receivers that offer an HDMI Out port to a VGA display. The HDMI to VGA video & audio is a Plug-N-Play video converter that automatically provides instant decoding of the HDMI signals to VGA video & audio signals to facilitate the viewing of HDTV video content on televisions, projectors, RF modulators or other devices that do not have HDMI inputs. Power is supplied by the HDMI Source.

HDMI & IR Repeater CAT5 Extender Wall Plate

Pan Pacific TPV-AHDX-WIR HDMI & IR Repeater CAT5 Extender Wall Plate

The TPV-AHDX-WIR HDMI with IR repeater CAT5 extender wall plate is designed to use 2 low cost CAT5E cables to extend HDTV sources from video players. The extra IR repeater function extends the remote control of HDMI sources.

Features:

• The Pan Pacific TPV-AHDX-WIR extends HDMI and IR signal over two CAT5/5e/6 cables.
• Transmission range up to 60 meters.
• Support high resolution up to 1080p.
• Fully HDCP compliant.
• HDCP 1.1, support DDC, EDID, CEC, Hot Plug Detect
• Built in IR repeater function, control the source devices from remote side.
• Receiver unit power could be sending from PCB inside 5V terminal or external 5V DC jack.

Package Includes:

1 Wall Plate Transmitter
1 Wall Plate Receiver
1 IR Transmitter Cable 6ft,
1 IR Receiver Cable 6ft.
1 Power Supply
1 Bag of Mounting Screws

Calrad 40-HDMI-EXT-A HDMI Audio Extractor

The Calrad 40-HDMI-EXT-A provides a simple method for extracting digital or analog audio from a single HDMI source at up to resolutions of 4Kx2K@60Hz. Outputs for Analog (L+R) analog, Digital optical Toslink + Coaxial audio signals. Supports (ARC) function, decodes to Toslink\Digital Coaxial outputs only. A three position slide switch and push button are provided for selecting audio functions and audio output formats. This unit supports (Non-Volatile Memory) if power is lost or removed the unit will maintain all settings.

Pan Pacific ADL-VGA+3.5-HDI-V2 Combines VGA and 3.5mm audio into a single HDMI output

The Pan Pacific ADL-VGA+3.5-HDI-V2 Converter is designed to convert video (analog signal) and audio signals from a PC or Laptop to digital HDMI output up to 1080p.

The VGA to HDMI Converter is a plug and play device, automatically sensing the native resolution of the display and convert the computer's output to a digital signal. The device will detect EDID displays and show the exact resolution. The converter will take the audio signal from the computer and embedded it into the HDMI signal output, so that you are able to enjoy both audio and video through one cable. It supports multiple resolutions up to 1920 x 1080 @ 60Hz.

The VGA to HDMI Converter is USB powered; therefore, it will not require an additional power supply.

Micro USB power also eliminates potential power problems if users use tablets or devices that don't provide enough power for units to operate correctly. No software or driver required. Simply plug and play.

Package Contents: VGA to HDMI Converter, User Manual, USB Type A to Micro USB cable (for power).

Features:
• Compliant with HDMI
• Support Audio
• Support up to UXGA and 1080P

40-1063-HS-2 Calrad 2-Way HDMI Splitter - 1080P & 4K

Calrad 40-1063-HS-2 2-Way HDMI Splitter

This 2-Way HDMI splitter provides a simple solution for distribution of a HDTV 1080P or UHD 4K x 2K HDMI signal. A single HDMI source can be split into two separate HDMI outputs. Two L.E.D. Signal indicators provide HDMI signal connectivity on Outputs 1 and 2. Selectable EDID settings, see the typical hookup diagram below. Includes 5Vdc, 1 Amp power supply.

Specifications:
Video Resolution: Up to 4Kx2K(3840x2160@60Hz YUV 4:2:0)
Input Bandwidth Frequency: 10.2Gps
Supports: 3D, 36 Bit Color
Supports four kinds of EDID settings: mixed EDID, copy EDID, default
1080p output, default 4Kx2K output.
Audio: Supports LPCM 7.1, Dolby TrueHD, Supports LPCM 7.1, Dolby Digital
Plus,TrueHD Master Audio.
Power: 5Vdc
Size: L-2.95” x W-2.67” x H-.992”

40-1063-HS-4 Calrad 4-Way HDMI Splitter - 1080P & 4K

Calrad 40-1063-HS-4 4-Way HDMI Splitter

This 4-Way HDMI splitter provides a simple solution for distribution of a HDTV 1080P or UHD 4K x 2K HDMI signal. A single HDMI source can be split into four separate HDMI outputs. Four L.E.D. Signal indicators provide HDMI signal connectivity on Outputs 1 thru 4. Selectable EDID settings, see the typical hookup diagram below. Includes 5Vdc, 1 Amp power supply.

Specifications:
Video Resolution: Up to 4Kx2K(3840x2160@60Hz YUV 4:2:0)
Input Bandwidth Frequency: 10.2Gps
Supports: 3D, 36 Bit Color
Supports four kinds of EDID settings: mixed EDID, copy EDID, default
1080p output, default 4Kx2K output.
Audio: Supports LPCM 7.1, Dolby TrueHD, Supports LPCM 7.1, Dolby Digital
Plus,TrueHD Master Audio.
Power: 5Vdc
Size: L-4.5” x W-2.44” x H-.984”

8-Way HDMI Splitter - 4Kx2K@60 (YUV4:4:4) 3D, Ultra HD 1x8 | 40-1063-HS-8 Calrad Electronics

The Calrad 40-1063-HS-8 (8 Port) 4K x 2K distribution amplifier provides a single source to be distributed to multiple displays or to HDMI signal based hardware. Individual L.E.D. signal indicators for each channel. Reliable video signal delivery with advanced EDID management circuitry. The built-in TMDS signal amplifier can send HDMI signals up to 50 feet, but for longer cable runs, use compatible HDMI balun extenders. Supports LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio formats. Perfect for 1:1 video signal delivery with 8 outputs for large scale commercial applications. Includes wall mounting hardware.

HDMI Repeater 4K x 2K \ 60hz 4:4:4 up to 165 ft. | 40-HDMIR-1 Calrad Electronics

This Calrad 40-HDMIR-1 inline repeater will amplify any standard HDMI signal up to video resolutions of 4K@60hz. Simply connect this unit in between two HDMI cables, (the repeater inline closest to display end) and your connection will instantly be supercharged. This repeater will digitally amplify and boost the HDMI signal, which in turn will significantly extend the maximum transmission distance between your source and display devices.

Component Video, Digital Audio and IR Balun Extender Over Cat5e/6

Calrad 40-YE0ID

Calrad 40-2000 HDMI Extender up to 150ft. over a single UTP Cable

Calrad 40-2000 HDMI Extender up to 150ft. over a single UTP Cable.

• Extend up to 150-ft Max with CAT6 @1080p or CAT5e up to 110-ft
• EDID learning capability to guarantee hand shaking
• 1 USB Power Interface Cable to Power the receiver from a USB Port on the TV
• Rack Ears and Velcro adhesive included
• Metal Case with LED Indicator

Calrad 40-2000-IR HDMI & IR Extender up to 150-ft over single UTP Cable

Calrad 40-2000-IR HDMI & IR Extender up to 150-ft over single UTP Cable.

• Extend up to 150-ft Max with CAT6 @1080p or CAT5e up to 110-ft
• Bidirectional IR control with independent IR RX and TX jacks
• Interface Cable(Included) for direct IR control from Home Automation Control System's
• EDID learning capability to guarantee hand shaking
• 1 USB Power Interface Cable to Power the receiver from a USB Port on the TV
• 2-IR Emitter and 2-IR Received Included
• Metal Case with LED Indicator

QAM 100 Channel RF Transmitter and Receiver Modulator System with IR | 40-101 Calrad Electronics

Calrad 40-101 Gen3 | New Generation of our QAM Technnology with new features and technology improvements,(QAM 100 Channel Transmitter and 100 Channel Receiver Modulator System with IR):

This unit is part of a large HDTV video distribution ECO system with up to 100 independent HDTV 1080P channels. Works with additional Calrad 40-101T Gen3 (QAM) Transmitters and with additional Calrad 40-101R (QAM) Receivers. Calrad has developed a simple expandable 1080p video delivery system with control signals over coax, Cat5e or Cat6 cabling with distances up to over 2,000 ft.. The technology can also support existing legacy wiring such as standard shielded audio, composite, component, HDMI cables using specific inline adapters for each cable type. Once connected the HDMI transmitter and receiver can connect a source to a display that can be totally independent from each other or multiple 40-101 units can be used providing signals upstream and downstream from each other, bidirectionally over the same wiring. Each transmitter and receiver can be IR controlled individually from a 3rd party automation control system or Calrad's Xcontrolled automation system or by a local individual IR receiver from a local remote (Included). Easy setup, set transmitters and receivers to independent channels manually on the front panel using the up/down push buttons or use a automated control system to maximize the flexibility using 100 channels between transmitters and receiver. Supports CATV digital splitters and amplifiers.

New Added Features that legacy 40-101, 40-101 Gen2 QAM hardware did not have.1. IR remote with OSD Menu that shows channel information2. OSD Menu appears when changing channels3. Transmitter and Receivers with RF Input \ Output connectivity jacks that help minimize the need for RF splitters, combiners, etc..4. Front panel lock functions to prevent users from changing or modifying settings on the front panel5. Upgradeable Firmware, rear panel USB Jack6. Rear panel USB Jack for external USB Hardware7. Vented chassis for better airflow, reduces overheating in higher temperature environments8. Individually addressable IR ID Control codes

Rack Kit for QAM and 2 Wire Hardware, 3 slots, 1-3/4" x 19" | 40-130 Calrad Electronics

The Calrad 40-130 provides the ability to easily rack mount Calrad's "U" based chassis, for example hardware like our QAM 40-100, 40-101 series QAM devices and 2 Wire HDMI devices. Mix QAM and 2 Wire transmitters and receivers as needed for your installation. See below for a typical rack setup for a sports bar using QAM Technology to deliver 12 HDMI Direct TV video feeds to multiple locations. Use Xcontrolled software with PC Laptops, Android and Apple devices to easily manage and control Direct TV set top boxes by IR or IP controlled protocols, control TV displays with IR or RS232 protocols.

HDMI Over a Single or Multimode LC Fiber Cable Extender | 40-2020 Calrad Electronics

Calrad 40-2020 | HDMI over a Single (Single or Multi Mode) LC Fiber Cable (1,000 ft.), 4K x 2K \ 60hz (4:4:4), HDR Extender with ARC, Bi-Directional IR\RS232 (Sold in Pairs)

Calrad's fiber solution provides long distance full spec., HDMI 4K uncompressed signal transmission for pristine video signal delivery. 55-690 Series Single Mode Fiber, available in lengths of 50 ft., 100 ft., 150 ft., 200 ft., 300 ft.. Use Calrad's 72-209 Fiber Optic LC Female to LC Female Coupler to make different lengths of fiber cables.

Package Contents: 1 x 40-2020 Transmitter, 1 x 40-2020 Receiver, 2 x DC Power Supplies, 1 x IR Receiver, 1 x IR Emitter

HDMI Transmitter & Receiver, 2-Wire, Pair with IR, RS232 | 40-204 Calrad Electronics

The Calrad 2 Wire technology system provides many useful features and options to send up to 1080P video, IR and RS232 control signals together over virtually any 2 wires. Our high speed balanced circuitry design for signal delivery is not polarity sensitive and can be wired terminal to terminal or reversed. A HDMI loop output is provided on the transmitter, eliminating the need for a separate HDMI splitter, this HDMI output allows the signal to pass on to 3rd party hardware. Easily send RS232 signals bi-directionally using a 3 position removable terminal block, that can be wired for one way or two way, (Full Duplex) communication. With the 40-204 many different types of cabling can be used to communicate between the transmitter and receiver providing a lot of flexibility solving complicated wiring issues for each type of installation. New or legacy wiring is possible without the worry of shielded or unshielded cables. Signals can easily be sent over Cat3; Cat5e; Cat6; RG59; RG6; Telephone Cable; Audio-Video Cable; Speaker Cable; Alarm Cable; Low voltage power cable. Reliable signal transmission up to 1,000 ft., signal length may vary based on the quality and wire gauge of the cable used. A single transmitter can send signals to 4 separate receivers using part number 40-206 4 port 2 wire splitter.

HDMI Receiver, 2-Wire, with IR, RS232 | 40-204R Calrad Electronics

The Calrad 40-204R is used with the 2 Wire technology system that provides many useful features and options to send up to 1080P video, IR and RS232 control signals together over virtually any 2 wires. Our high speed balanced circuitry design for signal delivery is not polarity sensitive and can be wired terminal to terminal or reversed. A HDMI loop output is provided on the transmitter, eliminating the need for a separate HDMI splitter, this HDMI output allows the signal to pass on to 3rd party hardware. Easily send RS232 signals bi-directionally using a 3 position removable terminal block, that can be wired for one way or two way, (Full Duplex) communication. Many different types of cabling can be used to communicate between the transmitter and receiver providing a lot of flexibility solving complicated wiring issues for each type of installation. New or legacy wiring is possible without the worry of shielded or unshielded cables. Signals can easily be sent over Cat3; Cat5e; Cat6; RG59; RG6; Telephone Cable; Audio-Video Cable; Speaker Cable; Alarm Cable; Low voltage power cable. Reliable signal transmission up to 1,000 ft., signal length may vary based on the quality and wire gauge of the cable used. A single 40-204 transmitter can send signals to 4 separate receivers using part number 40-206 4 port 2 wire splitter. Check out our new MagWire miniature 2 conductor 45 gauge cable that is available in various lengths and provides unique problem solving solutions for running this cable.

Product No Longer Available - *See 40-204

Signal Splitter, 2-Wire, 4 Port | 40-206 Calrad Electronics

Calrad 40-206 | 1080P (2 Wire 4 Port Signal Splitter): This splitter uses small terminal block connectivity to distribute 2 Wire signals, provides a simple method of connecting a single 40-204 2 Wire transmitter to four 40-204 2 Wire Receivers for signal distribution. In specific configurations and shorter distances, up to six 40-204 Receivers may be connected to the 40-206 Splitter. Ports 1-4 are for standard connectivity, ports 5-6 expansion ports are available for specific configurations, please consult Calrads tech support for further details. Easily mounts with double stick adhesive tape, (Included) or easily attached to wiring harnesses or rack hardware by using cable ties.

HDMI over IP with 64 Channels, 1080P | Calrad Electronics 40-300

The Calrad 40-300 series HDMI over IP provides 1080P HD video signals over UTP network cabling. Many configurations are possible, 1.) Between a single transmitter and receiver directly without a network switch. 2.) Use multiple transmitters and receivers over an existing or separate network to create a small to large scaleable video distribution system. Up to 56 channels are possible. Using standard network switches can be used with existing networks and internet, if more than 3 transmitters are used on a 100Mb system, it is advisable to use specific 1Gb IGMP network switches to manage the signal bandwidth properly for new or existing installations. Transmitter ID addresses are easily selectable using the front panel 6 position dip switch. Receiver channel addresses are accessible by using a 12 button credit card size remote control only, to change channel addresses. Use the up down keys or direct channel address keys 0-9 to change to the desired channel. Two interface adapter cables are included for 3rd party home automation control. A full duplex bi-directional RS232 port is available for easy serial communication between devices. Easily create a virtual matrix switcher over IP with unlimited possibilities. A HDMI signal loop-output on the Transmitter is provided for continuous signal transmission to other devices.