Submit search
-
The Calrad 92-180 is a IR Connecting hub with two 3.5mm Jacks to connect two IR Receivers. Designed to simplify the connection of IR receivers and emitters for IR signal distribution. The 92-180 has the ability to send IR signals to 4 sources using a single emitter or 8 sources if double IR emitters are used. One Port is an IR Blaster. Three colored LED indicators show power status, IR signal and IR confirmation.
This Calrad IR repeater system extends IR (Infrared) remote control signals from one location to another. The IR receiver is typically located on a TV display and receives IR signals from remote controls up to maximum of 33 ft. and re-transmits them to the 6 Port IR distribution block. The 6 x standard IR emitter ports re-transmits the IR signals to multiple pieces of individual equipment using 3 x dual non-flashing IR emitters. This 92-180A IR distribution block requires a 12Vdc power supply (included) or can work through the optional USB type �B� port on 5Vdc, See Diagram 1A below for typical configuration and hookup. Two Additional IR receiver ports are available for adding two additional IR receivers for multi-room control, Calrad IR Receiver part number, 92-181.
Calrad 40-101 Gen3 | New Generation of our QAM Technnology with new features and technology improvements,(QAM 100 Channel Transmitter and 100 Channel Receiver Modulator System with IR):
This unit is part of a large HDTV video distribution ECO system with up to 100 independent HDTV 1080P channels. Works with additional Calrad 40-101T Gen3 (QAM) Transmitters and with additional Calrad 40-101R (QAM) Receivers. Calrad has developed a simple expandable 1080p video delivery system with control signals over coax, Cat5e or Cat6 cabling with distances up to over 2,000 ft.. The technology can also support existing legacy wiring such as standard shielded audio, composite, component, HDMI cables using specific inline adapters for each cable type. Once connected the HDMI transmitter and receiver can connect a source to a display that can be totally independent from each other or multiple 40-101 units can be used providing signals upstream and downstream from each other, bidirectionally over the same wiring. Each transmitter and receiver can be IR controlled individually from a 3rd party automation control system or Calrad's Xcontrolled automation system or by a local individual IR receiver from a local remote (Included). Easy setup, set transmitters and receivers to independent channels manually on the front panel using the up/down push buttons or use a automated control system to maximize the flexibility using 100 channels between transmitters and receiver. Supports CATV digital splitters and amplifiers.
New Added Features that legacy 40-101, 40-101 Gen2 QAM hardware did not have.1. IR remote with OSD Menu that shows channel information2. OSD Menu appears when changing channels3. Transmitter and Receivers with RF Input \ Output connectivity jacks that help minimize the need for RF splitters, combiners, etc..4. Front panel lock functions to prevent users from changing or modifying settings on the front panel5. Upgradeable Firmware, rear panel USB Jack6. Rear panel USB Jack for external USB Hardware7. Vented chassis for better airflow, reduces overheating in higher temperature environments8. Individually addressable IR ID Control codes
The Calrad 40-130 provides the ability to easily rack mount Calrad's "U" based chassis, for example hardware like our QAM 40-100, 40-101 series QAM devices and 2 Wire HDMI devices. Mix QAM and 2 Wire transmitters and receivers as needed for your installation. See below for a typical rack setup for a sports bar using QAM Technology to deliver 12 HDMI Direct TV video feeds to multiple locations. Use Xcontrolled software with PC Laptops, Android and Apple devices to easily manage and control Direct TV set top boxes by IR or IP controlled protocols, control TV displays with IR or RS232 protocols.
The Calrad is ideal for receiver-based multi-room systems, this single-gang Designer style IR connecting block can power up to 9 IR emitters. The 92-159 allows you to connect up to 3 emitters to each of the emitter jacks labeled 1-3. Multiple receivers can also connect to the rear terminal block in a parallel configuration. Includes single gang designer style wall plate and 12Vdc power supply. Works with Calrad and industry standard IR products.
Calrad 92-160 IR DISTRIBUTION SYSTEM IR Connecting hub with a wired receiver that terminates to a 3.5mm stereo plug. A terminal block is also provided to support wired type receiver connections if needed. Designed to simplify the connection of IR receivers and emitters for IR signal distribution. The 92-160 has the ability to send IR signals to 6 sources using a single emitter or 12 or more sources if double or triple IR emitters are used.Three colored LED indicators show power status, IR signal and IR confirmation. Comes with one receiver and one emitter, 12 VDC supply.
Dual Band IR Receiver Tube
Calrad Electronics 92-165 IR Receiver 6 ft. cord. LCD/ PLASMA FRIENDLY. Works with Calrad's 92-160 IR Distribution Kit.
Labor saving-problem solving solderless connectors, stop cutting off IR emitter or IR receivers 3.5mm plugs, use Calrad part numbers: 30-489T and 30-295-T solderless connectors for easy in the field cable termination.
An IR injector and coupler system sends remote control signals to your satellite dish, cable box, or DVD using a standard IR remote, even if the component you wish to control is located in another room. The Calrad RF/IR Injector delivers your IR signals over a single coaxial cable up to 300 feet to the actual component. Attach Calrad's Model: 92-165 receiver using the 3.5mm stereo mini plug to the RF/IR Injector, which attaches to your coax cable between the satellite or cable input and the television you'll be watching. The IR Signal Coax Cable Coupler extracts the IR commands on the other end and delivers them to the satellite dish or other component via a Calrad's Model: 92-152 IR emitter. The IR Coupler/Injector are sold in pairs and the Model: 92-165 IR receiver, Model: 92-152 IR emitters are sold separately, as is a 12-Volt DC Power Supply, which is required to power the RF/IR Injector. There are several ways to use the 92-170 system, using coax only for the IR signal itself or with a CATV service or RF modulated system on the coax cable at the same time.
Calrad 40-1090-3D-IR Specifications:• HDTV Resolutions: 480p, 720p, 1080i, 1080p (Max 10.2Gbps, HDMI HIGH SPEED)• HDCP Compliant• Input TMDS Signal: 5Vpp, Input DDC 5Vpp• Vertical Frequency Range: 50/60Hz• HDMI ln/ Out Connectors: 19 pin Female Jack, 1 x RJ45 Shielded Jack each unit.• Included: 1 x IR Flashing Emitter (92-152) 1 x IR Receiver (92-165)• DC Power Supply: 2 x 5V, 2A, Switchmode Regulated, 110-220Vac• Housing: Metal, Black Color• Dimensions: Transmitter/ Receiver: 3.90" L x 2.77" W x 1.10" H• Weight: 300g each
Calrad 92-152-L Single IR Emitter Blaster with a 6 Ft. Cord
