Home > Test Equipment > Telephone Test Sets
We found 12 results matching your criteria.

Telephone Test Sets

Sort By:
Page of 1
MT-8100 Eclipse Tools Butt Set, Water & Drop Resistant MT-8100 Eclipse Tools Butt Set, Water & Drop Resistant

Eclipse Tools MT-8100 Butt Set, Water & Drop Resistant

  • This Eclipse Tools Butt Set complies with IP54 Dustproof & water resistance tests
  • The MT-8100 has Drop Protection Reliability
  • CE approved
  • High impedance monitor
  • Outer-lead voltage LED indicators
  • On/off checking feature checks out if telecom line is connected well
  • Continuous polarity LED indicators
  • Speakerphone for convenient hands-free two-way conversation
  • Tone and pulse operation
  • Store up to twelve 16-digit numbers in repeat dialer (speed dialing)
  • Last number redial feature
  • PBX pause button
  • Mute switch
  • Electronic switch controls the volume of the speakerphone/monitor
  • Automatic shut-off feature turns off speaker after five minutes of inactivity
  • Battery low-voltage LED indictors
  • Audible electronic ringer
  • Relocatable steel locking belt clip
  • Angled Bed of Nails allows it stab into the cable
  • RJ-11Modular plug can be inserted directly into telecom jack

Electrical
Loop limit 2 KΩ maximum at 48 VDC, (nominal 20 mA minimum loop current)

DC resistance
Talk mode: 300Ω typical
Monitor impedance: 39kΩ nominal at 1 kHz

Rotary dial output
Pulsing rate: 10pps+0.8pps
Percent break: 61%±2%
Interdigit interval: 1000 ms typical
Leakage during Break: >50 kΩ

DTMF output
Tone frequency error: ±1.2% maximum
Tone level: -8±2dBm combined (typical)
High versus low tone difference: 4 dB maximum

Memory dialing
Memory capacity: 13 memories including M1, last number redialing
Digit capacity: 16 digits per memory
PBX pause duration: 4 seconds
Line voltage test: 5 Phase AC/DC voltage, indication (under24V,24~100V,101~150V, 151~200V,more than 200V)
Monitor amplifier: 9V transistor; provides 25 hours continuous use, typical
Power source: Continuous use, typical
Automatic power shut off(Monitor type): After 5 min. of no audio signal
Speaker phone levels: Electronically adjustable
Power source: Battery (9V) 6F22 (Not included)

Physical
Measurement: 9-1/16" x 3-15/64" x 3-1/2"
Weight: 1.4 lbs
Water resistance: Dust protection & Waterproof tested to an IEC/EN 60529 IP54 rating
Cord sets: Angled bed of nails and RJ11 plug

Environmental
Temperature: Operating: 0 to 50°C, Storage:-10 to 60°C
Altitude: To 10,000 feet (3,000M) max
Relative humidity: 5 To 95%

Online Price: $225.29
Quantity Discount Available
400-042 Eclipse Tools Butt Set 400-042 Eclipse Tools Butt Set

Eclipse Tools 400-042 Butt Set

Recognized as the new industry standard, the 400-042 by Eclipse Tools butt set provides superior quality at an affordable price. With its high impedance monitor for data safe operation, technicians can clip onto a line in Monitor mode without disrupting existing traffic. Prokit's unsurpassed protection standards and durability assure the butt set will keep working even in the toughest environments. New weatherproofing provides enhanced resistance to severe weather conditions.

  • Built-in amplified speaker with three audio levelsM
  • Tone and pulse modes
  • Store up to twelve, 16-digit telephone numbers in speed dial
  • Pre-dialing and last number redial
  • Advanced PBX pause function
  • High-impedance monitor mode
  • Equipped with the mute switch
  • Continuous polarity LED indications
  • Power saving auto-shut off after 5 min of inactivity
  • Battery: 9 Volt (not included)

Online Price: $187.53
Quantity Discount Available
MT-8006B Eclipse Tools Data Diver, Test Set MT-8006B Eclipse Tools Data Diver, Test Set

Eclipse Tools MT-8006B Data Diver, Test Set

  • LCD display
  • Indicator for determining net service / speed
  • Smart power saving, battery life up to 6 months
  • 12 phone number memory for speed dialing
  • 16 dialing number memories
  • Tone (DTMF) and pulse operation
  • Up to 32 digits phone number memory for speed dialing
  • Pre-dialing and last number redial function
  • PBX pause key, insert a PBX pause in stored numbers
  • Telephone line polarity indicators
  • Low battery indication
  • Backlight function
  • RJ-11 port for easy test leads change
  • Ringer and voltage LED indication
  • Angled bed of nails and RJ-11 plug

Comes with free rubber boot and DC Voltage/Current Tester (Item: MT-8006VA).

Specs

Loop limit: 2 KΩ maximum at 48 Vdc, (nominal 20 mA minimum loop current)

DC resistance:
Talk Mode - 300Ω typical
Monitor impedance - >39kΩ nominal at 1 KHz

Rotary dial output:
Pulsing rate - 10pps+0.8pps
Percent break - 60/40%±2%
Inter digit interval - 1000 ms typical
Leakage during Break - >130 KΩ

DTMF output:
Tone frequency error - ±1.5% maximum
Tone level - -8±2dBm combined (typical)
High versus low tone Difference - 4 dB maximum

Memory dialing:
Memory capacity - 12 memories
Digit capacity - 16 digits per memory
PBX pause duration - 1~3.6 seconds Power source - 4pcs 1.5V AAA batteries (not included)

PHYSICAL(Hook included)
Measurement - 8.6" x 2.7" x 1.9"
Weight - 0.46 lbs

Online Price: $112.46
Quantity Discount Available
902-267 Eclipse Tools Replacement leads for 400-042 Butt-Set 902-267 Eclipse Tools Replacement leads for 400-042 Butt-Set

Eclipse Tools 902-267 Replacement leads for 400-042 Butt-Set

-

Online Price: $23.44
Quantity Discount Available
900-244 Eclipse Tools Banjo Adaptor 4-6-8 pin 900-244 Eclipse Tools Banjo Adaptor 4-6-8 pin

Eclipse Tools 900-244 Banjo Adaptor 4-6-8 pin

In-line Modular Adapter allows in-line testing for any plug/jack combination. It includes two 4-pair jacks plus a modular cord terminated with 4-pair "universal" plug for accessing any standard 6- or 8-position jack.

Individual conductors are broken out by pin number and correspond to eight separate test pads. Test equipment can be securely attached to the test pads using alligator clips. For quick reference in the field, USOC, T568A, and T568B wiring charts are printed right onto the body.

Online Price: $20.83
Quantity Discount Available
902-459 Eclipse Tools Test Leads for MT-8006B 902-459 Eclipse Tools Test Leads for MT-8006B

Eclipse Tools 902-459 Test Leads for MT-8006B

    Professional grade "Bed of Nails" insulation piercing clips within the jaws
  • Ultra-durable nylon braided jacket
  • Guarentee ruggedness and flexibility
  • Non-Insulated ring terminals
  • 50 inch
  • The 902-459 fits the MT-8006B

Online Price: $15.50
Quantity Discount Available
5MT-8006-CROC Eclipse Tools Test Leads for MT-8006B Data Diver 5MT-8006-CROC Eclipse Tools Test Leads for MT-8006B Data Diver

Eclipse Tools 5MT-8006-CROC Test Leads for MT-8006B Data Diver

-

Online Price: $15.11
Quantity Discount Available
5MT-8006B-H Eclipse Tools Case for MT-8006B 5MT-8006B-H Eclipse Tools Case for MT-8006B

Eclipse Tools 5MT-8006B-H Case for MT-8006B

-

Online Price: $9.45
Quantity Discount Available
MT-8006VA Eclipse Tools Voltage/Current tester to be used with MT-8006B MT-8006VA Eclipse Tools Voltage/Current tester to be used with MT-8006B

Eclipse Tools MT-8006VA Voltage/Current tester to be used with MT-8006B

-

Product No Longer Available
25501109 Fluke Networks TS25D 25501109
TS25D Test Set with ABN Kit

The Fluke Networks TS25D test set features data lockout and lockout override, making you completely safe in talk or
monitor mode. The DSL/POTS filtering technology allows you to safely draw dial tone without downing
DSL. A built-in analog tone generator simplifies wire identification with a probe. An amplified speaker
makes monitoring the line hands-free, so you can keep working. The Talk Battery function provides
voltage to carry voice conversation on non-powered pairs. Also includes Caller-ID and Call-waiting
Caller-ID functions. All in a compact unit with an oversized, robust liquid crystal display (LCD) that
makes the intuitive, common-sense menus easy-to-read and use.


  • Caller-ID and Call-waiting Caller-ID
  • Amplified speakers for hands-free monitoring
  • Data lockout and data lockout override
  • Tone generator for wire identification
  • Talk battery to power voice conversation on dry (non-powered) lines

Product No Longer Available
19800009 Fluke Networks TS19 Test Set with ABN 19800009 Fluke Networks TS19 Test Set with ABN

The Fluke Netowrks TS19 test set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in Monitor Mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.

  • High impedance DataSafe operation in monitor mode
  • Tone (DTMF) and pulse operation
  • Last number redial
  • Polarity indication in talk mode

Fluke Part Number 19800009

Product No Longer Available
400-028 Eclipse Tools Dual Telephone Line Tester 400-028 Eclipse Tools Dual Telephone Line Tester

Eclipse Tools 400-028 Dual Telephone Line Tester

  • Tester two lines in Same RJ11 jack
  • Protects modem (Digital systems provide highcurrent phone lines that can damage most computer modems. Since both safe analog lines and dangerous digital lines use the same type of connectors, it is impossible to visually determine if a phone line is safe. Use Voltage Valet's Digital Phone Line Tester before you plug in to detect high-current digital telephone lines that can damage your computer modem.)

Product No Longer Available