Submit search
-
Allows the user to install the wall plate after all cables and electronic hardware is terminated. Simply install the top half of the plate to your low voltage mounting bracket with the lower hinge open. Then rotate it into place and install the screw to finish off the job.
Plastic single gang hood provides a versatile method of passing multiple cables from behind the wall to equipment. Hoods may be installed in our 70-558 or 70-568 low voltage brackets and are compatible with our 28 series designer style single and multi gang wall plates. These hoods may be installed with the scoop facing in or out of the wall, to suit a variety of needs.
Plastic single gang hood designed for post or retrofit cable installations as well as for cables with large connectors. The lower portion of this bulk wire wall plate is removable so you can install the plate after the cables have been installed or connected. Can be used with our 70-558 or 70-568 low voltage brackets. Squared single port for maximum cable capacity. This retrofit plate is reversible so you can have the scoop inside or outside of the wall to suit a variety of needs.
Plastic dual gang hood designed for post or retrofit cable installations as well as for cables with large connectors. The lower portion of this bulk wire wall plate is removable so you can install the plate after the cables have been installed or connected. Can be used with our 70-558 or 70-568 low voltage brackets. Squared dual port for maximum cable capacity. This retrofit plate is reversible so you can have the scoop inside or outside of the wall to suit a variety of needs.
