Submit search
The Klein Tools voltage tester is non-contact tester with an integrated flashlight. The NCVT-3P voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.
Klein Tools Part Number NCVT-3P
This Klein Tools Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The ET310 Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester.
This Klein Tools NCVT-5A Voltage Tester is a Versatile Dual-Range Non-Contact Voltage Tester with Integrated Laser Pointer. The NCVT-5A volt tester offers two modes for detecting voltage: Mode 1 detects voltage from 70 to 1000V AC, while Mode 2 detects voltage from 12 to 1000V AC. With high-pitched audible alerts that increase in frequency as higher voltage is sensed or when proximity to the voltage source gets closer, you can rely on accurate and timely notifications. The laser pointer adds an extra level of convenience and can be used independently or simultaneously with the NCVT. Enjoy the peace of mind of the CAT IV 1000V safety rating.
Klein Tools Non-Contact Voltage Tester detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires. A bright green LED indicates the tester is powered on. It changes to red and an audible tone sounds when voltage is detected.
Part Number Klein Tools NCVT-1P
Features:
The Eclipse Tools Receptacle Tester for Standard Outlets tests for correct wiring. It can be plugged in to check outlet polarity, and a light pattern is displayed to indicate status. This 400-029 model is a UL approved and RoHS compliant tester.
Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3 Wire, 120Volt AC.
Eclipse Tools GFCI Receptacle Tester detects faulty wiring in 3 Wire receptacles, 6 possible fault conditions displayed by light pattern. It tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3 Wire, 120Volt AC circuits. The 400-030 GFCI receptacle tester meets UL and RoHS standards.
Applications: Electricians, maintenance staff, service and safety personnel, and even homeowners
This Eclipse Tools Non?contact voltage tester detects AC voltage from 12 to 1000 VAC without metallic contact. Portable device ideal for electricians, maintenance staff, service and safety personnel, and even homeowners.
3 piece
The next generation VoltAlert 1AC-II A1 AC non-contact voltage detector from Fluke is easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
Model Number: Fluke 1AC-II
This Klein Tools Voltage Tester with Laser Pointer provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems.