Submit search
Calrad's 40-284A is a simple solution for converting HDMI signals to VGA video & audio. It is a perfect solution for connecting video cards [desktop or laptop] or consumer electronics devices such as game consoles or home theater receivers that offer an HDMI Out port to a VGA display. The HDMI to VGA video & audio is a Plug-N-Play video converter that automatically provides instant decoding of the HDMI signals to VGA video & audio signals to facilitate the viewing of HDTV video content on televisions, projectors, RF modulators or other devices that do not have HDMI inputs. Power is supplied by the HDMI Source.
The Calrad 40-HDMI-EXT-A provides a simple method for extracting digital or analog audio from a single HDMI source at up to resolutions of 4Kx2K@60Hz. Outputs for Analog (L+R) analog, Digital optical Toslink + Coaxial audio signals. Supports (ARC) function, decodes to Toslink\Digital Coaxial outputs only. A three position slide switch and push button are provided for selecting audio functions and audio output formats. This unit supports (Non-Volatile Memory) if power is lost or removed the unit will maintain all settings.
-
HDMI feed-thru couplers are designed for connecting active equipment to HDMI cabling and for interconnecting segments of HDMI cabling.
Philmore Electronics part number 45-7043
Philmore Electronics part number 45-7044
Philmore Electronics part number 45-7040
Philmore Electronics part number 45-7041
Philmore Electronics part number 45-7042
The Calrad 40-300 series HDMI over IP provides 1080P HD video signals over UTP network cabling. Many configurations are possible, 1.) Between a single transmitter and receiver directly without a network switch. 2.) Use multiple transmitters and receivers over an existing or separate network to create a small to large scaleable video distribution system. Up to 56 channels are possible. Using standard network switches can be used with existing networks and internet, if more than 3 transmitters are used on a 100Mb system, it is advisable to use specific 1Gb IGMP network switches to manage the signal bandwidth properly for new or existing installations. Transmitter ID addresses are easily selectable using the front panel 6 position dip switch. Receiver channel addresses are accessible by using a 12 button credit card size remote control only, to change channel addresses. Use the up down keys or direct channel address keys 0-9 to change to the desired channel. Two interface adapter cables are included for 3rd party home automation control. A full duplex bi-directional RS232 port is available for easy serial communication between devices. Easily create a virtual matrix switcher over IP with unlimited possibilities. A HDMI signal loop-output on the Transmitter is provided for continuous signal transmission to other devices.
Display Port to HDMI Adapter, 4K Display Port, Male to HDMI female, 8"
Calrad 35-715 HDMI Female to DVI-D Male Cable Adapter with Gold plated contacts. 6 inch Length
