Coax Surge Suppressor
-
Online Price: $5.07
CLOSEOUT PRICING! $3.72
$50 QUALIFIES FOR FREE SHIPPING!
Savings: $1.35
UHF/VHF/FM Droptap
GC Electronics 32-3183-BU
Online Price: $2.14
CLOSEOUT PRICING! $1.52
$50 QUALIFIES FOR FREE SHIPPING!
95-1046-S-1 Calrad Electronics | Stereo Analog Audio Ground Isolation Balun with IR
Stereo Analog Audio Ground Isolation Balun with IR, RS232, RS422 or RS485 Connectivity - Sold in Pairs.
This Calrad 95-1046-S1 Audio-IR-Data Pigtail Balun is ideal for residential, corporate A/V, schools, home theater applications and any other situation involving structured audio distribution that transmits stereo audio signals via Cat.5e/6 UTP cable. This Balun provides a low cost and versatile UTP cabling solution for any analog audio distribution system. Each audio channel transmission signal is completely isolated with transformer based circuitry from start to finish eliminating any issues with ground loops or audio 60hz hums. The balun also has a single 3.5mm IR signal path for bi-directional signal communication and also a cable pair for data-control communication that supports RS232, RS422, RS485. Easy bi-directional connectivity either balun can act as a transmitter or receiver. Use standard pre-made Cat5e, Cat6 cables or terminate your own cabling using the 568A standard start to finish or the 568B standard start to finish. Distances of up to 250ft., see detailed specifications below. Please Note! All 4 pairs \ 8 conductors of the RJ45 connector are used and no spare connectivity is available.
Tech Note: The RS232 Data wires can also be used for additional IR signals and low current Relay trigger connectivity
95-1146 Calrad Electronics | Component Video Stereo Audio Balun Over Single Cat5e Cable (Pair)
Calrad 95-1146 | Component Video Stereo Audio Extender Over Single Cat5e Cable - Sold as a Pair
Calrad’s new line of audio/ video baluns provide a simple low cost method of delivering composite video and stereo audio over UTP cable. 25k Gold plated jacks. Chassis: ABS Plastic. Extend your Component Video + L, R Audio overCat5e/6.
Product No Longer Available - *Replaced by Calrad 40-YE0ID
Calrad 92-180 IR Distribution System - 5 Port Kit
The Calrad 92-180 is a IR Connecting hub with two 3.5mm Jacks to connect two IR Receivers. Designed to simplify the connection of IR receivers and emitters for IR signal distribution. The 92-180 has the ability to send IR signals to 4 sources using a single emitter or 8 sources if double IR emitters are used. One Port is an IR Blaster. Three colored LED indicators show power status, IR signal and IR confirmation.
Product No Longer Available - See Calrad 92-180A
92-180-A Calrad IR Repeater Kit
Calrad 92-180-A IR Repeater Kit, 6 Port Distribution System
This Calrad IR repeater system extends IR (Infrared) remote control signals from one location to another. The IR receiver is typically located on a TV display and receives IR signals from remote controls up to maximum of 33 ft. and re-transmits them to the 6 Port IR distribution block. The 6 x standard IR emitter ports re-transmits the IR signals to multiple pieces of individual equipment using 3 x dual non-flashing IR emitters. This 92-180A IR distribution block requires a 12Vdc power supply (included) or can work through the optional USB type �B� port on 5Vdc, See Diagram 1A below for typical configuration and hookup. Two Additional IR receiver ports are available for adding two additional IR receivers for multi-room control, Calrad IR Receiver part number, 92-181.
CS9220 Philmore Satellite Amplifier, 900-2000 Mhz
Philmore CS9220 Satellite Amplifier, 900-2000 Mhz
- 900-2000 MHz
- Zinc Die-Cast Housing
- Completely Sealed
- Machined Threaded �??F�?� Connectors with Weather Cap
- Minimum 20 dB Gain
Frequency Range(MHz): 900-2000
Gain(dB): 20-24
Gain Flatness(dB): +/-1
Gain Sloping(dB): 4
Noise Figure(dB): 7.0
In/Out VSWR (ohms): 2.5
DC Power (V): +15 to +20
Philmore Electronics part number CS9220
QAM 100 Channel RF Transmitter and Receiver Modulator System with IR | 40-101 Calrad Electronics
Calrad 40-101 Gen3 | New Generation of our QAM Technnology with new features and technology improvements,(QAM 100 Channel Transmitter and 100 Channel Receiver Modulator System with IR):
This unit is part of a large HDTV video distribution ECO system with up to 100 independent HDTV 1080P channels. Works with additional Calrad 40-101T Gen3 (QAM) Transmitters and with additional Calrad 40-101R (QAM) Receivers. Calrad has developed a simple expandable 1080p video delivery system with control signals over coax, Cat5e or Cat6 cabling with distances up to over 2,000 ft.. The technology can also support existing legacy wiring such as standard shielded audio, composite, component, HDMI cables using specific inline adapters for each cable type. Once connected the HDMI transmitter and receiver can connect a source to a display that can be totally independent from each other or multiple 40-101 units can be used providing signals upstream and downstream from each other, bidirectionally over the same wiring. Each transmitter and receiver can be IR controlled individually from a 3rd party automation control system or Calrad's Xcontrolled automation system or by a local individual IR receiver from a local remote (Included). Easy setup, set transmitters and receivers to independent channels manually on the front panel using the up/down push buttons or use a automated control system to maximize the flexibility using 100 channels between transmitters and receiver. Supports CATV digital splitters and amplifiers.
New Added Features that legacy 40-101, 40-101 Gen2 QAM hardware did not have.1. IR remote with OSD Menu that shows channel information2. OSD Menu appears when changing channels3. Transmitter and Receivers with RF Input \ Output connectivity jacks that help minimize the need for RF splitters, combiners, etc..4. Front panel lock functions to prevent users from changing or modifying settings on the front panel5. Upgradeable Firmware, rear panel USB Jack6. Rear panel USB Jack for external USB Hardware7. Vented chassis for better airflow, reduces overheating in higher temperature environments8. Individually addressable IR ID Control codes
Rack Kit for QAM and 2 Wire Hardware, 3 slots, 1-3/4" x 19" | 40-130 Calrad Electronics
The Calrad 40-130 provides the ability to easily rack mount Calrad's "U" based chassis, for example hardware like our QAM 40-100, 40-101 series QAM devices and 2 Wire HDMI devices. Mix QAM and 2 Wire transmitters and receivers as needed for your installation. See below for a typical rack setup for a sports bar using QAM Technology to deliver 12 HDMI Direct TV video feeds to multiple locations. Use Xcontrolled software with PC Laptops, Android and Apple devices to easily manage and control Direct TV set top boxes by IR or IP controlled protocols, control TV displays with IR or RS232 protocols.
3 Way Digital TV Splitter, 2.4GHz | 75-713-HG-3 Calrad Electronics
75-713-HG-3 | 3 Way Digital Splitter, 2.4GHz. 1 input to 3 outputs. All Ports Power Pass, 5-2400 MHz, splitter with precision "F" connector threads, anti-corrosion zinc die cast case and mounting tabs with screws.
Specifications:
- All Ports DC Power Passive
- Power Pass Voltage, Current: 24V 0.8A (Max)
- Low Insertion Loss: 5-40Mhz (5.5db), 1500-2400mhz (7.0db)
- High Port to Port Isolation
- RFI Isolation: 130 dB
- Impedance: 75 Ohms
- Out-1, Out-2, Out-3 Port Spacing: 0.83"
- Mounting Tabs: 2 x (0.18" Screw Opening)
