Calrad 45-758 Regulated Battery Charger & Power Supply 3 Amp
For alarm system power and automatic
recharging of back-up batteries. LED
power indicator, 2.5 amp continous and 3
amp peak power. Input 16Vac to
programmable output 6/12/24Vdc. Fuse
protected. Comes with battery leads.
6 Position Barrier Strip. Mounts with
double stick tape.
Calrad 95-1040 RCA Composite Audio & Video Balun CAT-5 Cable System
The Calrad 95-1040 will transmit composite video and L+R analog audio up to 1000' over UTP cat5e or cat6 cable. 3 x RCA female jacks to RJ45 female jack. Units sold individually, 2 pieces required. Non-directional signal use.
Size: Length 3.5" x Width 2.2" x Height 1".
Technical Note: Using adapters, the composite video jack can be used to deliver IR as well. Use Calrad 75- adapter for CCTV use.
Calrad 95-403 Retro-Reflective Photoelectric Sensor Entry Alert System
This unit is perfect for monitoring an entrance or use as an entrance
indicator. Uses Retro-reflective photoelectric sensor. When beamin
interupted a 'ding-dong' sound or optional siren sound will occur.
Speaker volume can be adjusted or turned off. When in siren mode,
sounding time is adjustable from 3 to 30 seconds. Range is up to 22
feet or 7 meters. 9Vdc power adapter is included. All components
plug into each other so no hard wiring is needed.
Includes the following:
1 Retro-reflective photoelectric sensor
1 Reflector
1 Speaker/electronic chime
1 9Vdc power adapter
Hardware included:
Mounting brackets X 3, Screws X 7, Drywall Anchor X 1
Specifications:
Sensing Range: ............................................22feet
Voltage Supply:..........................Sensor = 9-15Vdc
Chime = 12Vdc
Total Current Consumption: ...............100mA Max.
Standby Current: ...........................................25mA
Light Source:...............................................IR LED
Control Output: ....................... NPN open collector
...........................................(DC 30V, 100mA Max.)
Speaker Response Time:............~1 sec. for chime
30 sec. for alarm
Alarm Time Range:....Adjustable 3~30sec. for alarm
Speaker Output:..Chime/Off/Alarm (Select by switch)
Calrad 95-455 Dual Tec Infrared Detector
INFRARED &
MICROWAVE DUALTEC
MOTION DETECTOR
Our most advanced motion detector using an
infrared sensor to pickup thermal energy and a
microwave detector to detect physical motion. This
detector incorporates a new sensing circuit to
process both technologies to provide a reliable
triggering sensor for security systems. Features
Microwave/PIR technology, single edge PIR
triggering and L.E.D. indicators for IR detection,
microwave detection, and alarm triggering.
Operates from 9-12Vdc, current draw 35ma. N/C
dry contacts 30Vdc, 100ma. Protection coverage
35� long x 30� wide. Color: white.
Calrad 95-460 Infrared Sensor w/ Pulse Count
95-460 IR SENSOR
WITH PULSE COUNT
Small compact infrared sensor is perfect
for all applications commercial or
residential. Stable circuitry for reliable
operation. Optional brackets for multiangle
mounting on ceilings or walls.
Available in form C relay for normally
open, normally closed applications.
Tamper switch provided, 35' x 35'
coverage. Operates on 12Vdc.
Calrad 95-464 Glass Break Detector
DUAL GLASS
BREAK DETECTOR
This sensor is used to protect areas which
conventional sensors that have to be attached to
each window, but this unit covers a specific area
and uses a dual sensing technology to protect a
larger area. The flex audio technology is sensitive to
different frequencies. Ultra low end types generated
by hard sharp blows to glass windows. The unit
remains off until flex technology detects a blow to the
glass. For an alarm condition to occur the audio
must first detect the frequency of breaking glass
within a defined time window. After the flex detects
a blow to the glass, because both technologies must
detect and verify glass breakage, false alarms are
virtually eliminated. Indicator LED's provide visual
indicators for various functions. Operates on 12Vdc.