Submit search
The Calrad 40-300 series HDMI over IP provides 1080P HD video signals over UTP network cabling. Many configurations are possible, 1.) Between a single transmitter and receiver directly without a network switch. 2.) Use multiple transmitters and receivers over an existing or separate network to create a small to large scaleable video distribution system. Up to 56 channels are possible. Using standard network switches can be used with existing networks and internet, if more than 3 transmitters are used on a 100Mb system, it is advisable to use specific 1Gb IGMP network switches to manage the signal bandwidth properly for new or existing installations. Transmitter ID addresses are easily selectable using the front panel 6 position dip switch. Receiver channel addresses are accessible by using a 12 button credit card size remote control only, to change channel addresses. Use the up down keys or direct channel address keys 0-9 to change to the desired channel. Two interface adapter cables are included for 3rd party home automation control. A full duplex bi-directional RS232 port is available for easy serial communication between devices. Easily create a virtual matrix switcher over IP with unlimited possibilities. A HDMI signal loop-output on the Transmitter is provided for continuous signal transmission to other devices.
This Manhattan HDMI over Ethernet Extender Kit extends an HDMI Signal up to 60 m (196 ft.) at 1080p@60Hz with a Single Cat6 Ethernet Cable.
Extends an HDMI signal over a single CAT5e or Cat6 cable. HDCP and HDMI 3D compliant. HDMI mode, LPCM 7.1, True HD, DTS-HS or stereo audio modes. Sold as a transmitter and receiver set. 5Vdc power supplies included. Note: Only Cat 6 Cable Delivers 3D! Specifications: Video Resolution 480P, 720P, 1080P Distance: 100 Meters HDMI In\Out Connectors DC Power Supply: 5Vdc, 2A Receiver-Transmitter Size: Length 5.125" x Width 3.5" x Height 1.25"
Calrad 40-1090-3D Specifications:HDTV Resolutions: 480P, 720P, 1080I, 1080P (1.65 Gbps, HDMI 1.3b)Input TMDS Signal: 5Vpp, Input DDC 5VppVertical Frequency Range: 50/60HzHDMI In\Out Connectors: 19 pin Female Jack, 1 Jack each unitRJ45 Shielded Connectors: 1 Jack, each unit, 2 x L.E.D power indicatorsDC Power Supply: 2 x 5V, 2A, Switchmode Regulated, 110-220VacHousing: Metal, Weight: 300g ea.Dimensions: L-3.9" x W-2.77" x H-1.1"
Calrad 40-1090-3D-IR Specifications:• HDTV Resolutions: 480p, 720p, 1080i, 1080p (Max 10.2Gbps, HDMI HIGH SPEED)• HDCP Compliant• Input TMDS Signal: 5Vpp, Input DDC 5Vpp• Vertical Frequency Range: 50/60Hz• HDMI ln/ Out Connectors: 19 pin Female Jack, 1 x RJ45 Shielded Jack each unit.• Included: 1 x IR Flashing Emitter (92-152) 1 x IR Receiver (92-165)• DC Power Supply: 2 x 5V, 2A, Switchmode Regulated, 110-220Vac• Housing: Metal, Black Color• Dimensions: Transmitter/ Receiver: 3.90" L x 2.77" W x 1.10" H• Weight: 300g each
Calrad 40-2010 HDMI 4K Extender
The 40-2010 HDBaseT v1.0 balun provides a single UTP category 5e/6 cable solution to deliver pristine digital signals from all HDTV formats and signal sources from 480i/p to1080i/p, 4K x 2K \ 60hz. Provides bi-directional IR and RS232 support with POC to the receiver for a single cable solution. Option 1, 3rd party IR interface control and connectivity. Option 2, stand alone IR receiver and emitter solution. Send IR control signals from any 3rd party automation systems bi-directionaly using Calrad's optional 40-IRC3 interface cable see Option 1 IR connectivity below. L.E.D. indicators provide reference for Power, HDMI signal status, HDBaseT UTP cable signal reference.
