CaiKote 44 Conductive Silver Coating - Caig K-CK44-G
Conductive Silver Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon/silver based surfaces. It may also be used as a coating for shielding (EMI) of electronics.
Online Price: $10.95 Quantity Discount Available
CircuitWriter Conductive Pen - Caig CW100P
Precision Conductive Ink Applies instant traces on most surfaces (epoxy, glass, plastic, metal). Draw traces on circuit boards, repair defective traces, make jumpers and shield electronics, design prototype circuits and repair rear-window heater traces.
Online Price: $29.95
Online Sale Price: $20.59
10-312 GC Electronics Radio TV Cement Solvent
GC Electronics 10-312 Radio TV Cement Solvent 2 fl. oz. Bottle
This GC Radio TV Cement Solvent fast acting solvent is formulated for use in speaker repair. The 10-312 solvent will dissolve cement on speaker cones, spiders, frames and voice coils.
10-8109 GC Electronics Heat Sink Compound Type Z9 Silicone
GC 10-8109 Heat Sink Compound is a industry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden.
Meets Mil. Spec. C-47113.
GC Part No. 10-8109 1 fl. oz. Tube
10-8120 GC Electronics Heat Sink Compound Type 44
GC Electronics 10-8120 Heat Sink Compound Type 44 - Non-Contaminating 1 oz. Tube
This GC Heat Sink Compound is compounded with 100% synthetic base stocks. Features excellent heat transfer efficiency, thermal stability, high flow rate, no separation, bleed or migration typical of silicone based greases.
22-238 GC Electronics PC Board Etching Solution
This GC Electronics 22-238 ferric chloride solution is one of the most effective and safest etching materials for copper clad PC boards. 6 oz. will etch about 180 sq. inches of PC board. Use only in plastic or glass trays. pH is 1.57.
22-240 GC Electronics PC Board Stripping Solution
This GC Electronics 22-240 Stripping Solution removes remaining etch resist from PC boards. The GC 22-240 removes any coating that remains over the copper after etching which may interfere with the soldering of the component leads to the PC board.
Techspray 1620-10S Ecoline Blue Shower Cleaner/Degreaser
Maintenance cleaners clean oil and contaminants off of metal parts, printed circuit boards, barcode instruments, switch boxes, gear boxes, and engines. Techspray has produced Blue Shower® maintenance cleaners for over 30 years, making Blue Shower a staple in maintenance departments all over the world! E-Line is a hydrocarbon-based cleaner formulated to be powerful, yet very economical. Eliminate brushing and scrubbing, saving time and materials.
Features & Benefits:
- Powerful cleaner
- Ideal for sensitive plastics
- Non-ozone depleting
- Safe on electronics
- Rapid evaporation
- Zero residue
Online Price: $18.43 Quantity Discount Available
Techspray 1621-10S Ecoline Flux Remover
E-Line is a hydrocarbon based defluxer formulated to be powerful, yet very economical. Eliminates brushing and scrubbing, saving time and materials. Micro-components and fine pitch leads are delicate and easily damaged, so brushing and scrubbing should be avoided if possible. Techspray aerosol solvents have a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch.
Features & Benefits
- Powerful cleaner
- Ideal for sensitive plastics
- Non-ozone depleting
- Safe on electronics
- Rapid evaporation
- Zero residue
- Proven effective for lead-free processes
Online Price: $18.84 Quantity Discount Available
Techspray 1622-10S Econoline Contact Cleaner
Hydrocarbon based defluxer formulated to be powerful, yet very economical. Eliminates brushing and scrubbing, saving time and materials.
Features & Benefits:
- Powerful cleaner
- Ideal for sensitive plastics
- Non-ozone depleting
- Safe on electronics
- Rapid evaporation
- Zero residue
Online Price: $17.96 Quantity Discount Available
Techspray 1630-16S Blue Shower - All Purpose Cleaner-Degreaser
Maintenance cleaners clean oil and contaminants off of metal parts, printed circuit boards, barcode instruments, switch boxes, gear boxes, and engines. Techspray has produced Blue Shower® maintenance cleaners for over 30 years, making Blue Shower a staple in maintenance departments all over the world! G3 Blue Shower is patented non-flammable cleaner formulated to be powerful, yet economical. Eliminate brushing and scrubbing, saving time and materials.
Features & Benefits:
- Powerful cleaner
- Non-flammable
- Non-ozone depleting
- Safe on electronics
- Rapid evaporation
- Zero residue
- Safe on most plastics
- EPA SNAP approved
Online Price: $39.31 Quantity Discount Available
Techspray 1631-16S Flux Remover
The Techspray 1631-16S G3 has a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch. Patented defluxer formulated to be powerful and nonflammable, yet economical. The Techspray 1631-16S eliminates brushing and scrubbing, saving time and materials.
Online Price: $37.45 Quantity Discount Available
Techspray 1631-5S Flux Remover G3
Introducing the Techspray 1631-5S Flux Remover G3, the ultimate solution for removing flux residues and achieving pristine cleanliness. With its powerful spray and strong solvent, this flux remover effectively blasts off residues from areas under components that are inaccessible to brushes. This patented defluxer is specifically formulated to be both powerful and non-flammable, ensuring safety without compromising effectiveness. Say goodbye to tedious brushing and scrubbing as the Techspray 1631-5S Flux Remover G3 saves you time and materials with its efficient cleaning capabilities. Upgrade your flux removal process with this economical and highly effective solution.
Online Price: $21.70 Quantity Discount Available
Techspray 1632-16S General Purpose Contact Cleaner
Patented non-flammable contact cleaner formulated to be powerful, yet economical. Eliminate brushing and scrubbing, saving time and materials.
Features & Benefits:
- Powerful cleaner
- Non-flammable
- Non-ozone depleting
- Safe on electronics
- Rapid evaporation
- Zero residue
- Safe on most plastics
- EPA SNAP approved
Online Price: $39.71 Quantity Discount Available
Techspray 1672-10S Freezer
Rapidly evaporating liquid that super-chills isolated areas. Used as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. It also increases visibility of cold solder joints, cracks in printed circuit boards and oxidized junctions.
Features & Benefits:
- 100% pure HFC-134a
- Non-flammable
- Non-ozone depleting
- Moisture free
- Zero residue
- Safe on plastics
- VOC exempt
Online Price: $20.44 Quantity Discount Available
Trace Tech No-Clean Flux Dispencing Pen
Techspray 2507-N Trace Tech No-Clean Flux Dispencing Pen
Resin and halide-free no-clean flux has excellent wetting abilities and leave no problematic residues. Excellent for prototyping, rework, and repair and to provide extra wetting for lead-free wire solder.
Features & Benefits:
- Excellent wetting
- Works with lead and lead-free solders
- Non-ozone depleting
- No cleaning necessary if fully activated
1673-10S Techspray Economy Duster
Techspray 1673-10S Economy Duster
- Best value & 30% more volume
- Lower global warming potential / 10% of HFC-134a
- Non-ozone depleting
- Moisture free
- Zero residue
- Safe on plastics
- VOC exempt
- Velocity 11.4 m/s
Economical HFC152a based air duster. Note: not for use on powered electrical equipment, on hot surfaces, and around open flames or sparks.
Techspray Part Number 1673-10S