Join Our Mailing List!

FacebookTwitter





  Home > Shop by Brand > Power-Sonic Batteries > Battery Chargers >

PSC-12800A-C Power-sonic Battery Charger for 4-8ah batteries - 12V 800ma - SLA C-Series Switch-Mode Automatic
Powersonic Battery Charger PSC-12800A-C


 
Qty:

Description Technical Specs
 

Powersonic PSC-12800AC Battery Charger for 4-8ah batteries 12V 800ma SLA C-Series Switch-Mode Automatic

Features:
  • I.C. based voltage and current regulation designed forsealed (valve-regulated) lead-acid batteries
  • Useable on domestic and overseas input voltagesfrom 110VAC - 60Hz to 240VAC - 50Hz, except for the PSC-1210000A-C, see charger selection guide
  • Automatic, current sensing dual-rate charging forefficient, care-free and safe operation
  • L.E.D.s indicate -power on- and -FAST- and -FLOAT-charging modes
  • Lightweight wall mounted plug-in or desk top designwith screw type output terminals, depending on outputcurrent
  • Protected against accidental reverse polarity connection
  • U.L. and European C.E. approval
Operating Characteristics:
A-C series chargers are new -switching- type devices which operate without the use of transformers. I.C.'s control and regulate current and voltage and automatically switch from the higher fast charge voltage to the lower float voltage when batteries are very close to being fully charged. At the float voltage it is safe to leave the battery connected to the charger indefinitely, making charging pretty much fool-proof.

In the fast charge mode voltage goes up to 2.45V +/- 0.05V before switching, in the float charge mode voltage is held between 2.25- 2.30V/cell.

This charger is ideal for cyclic applications where recharge time is critical and timely charge termination cannot be counted on. This charger ensures optimum battery performance & service life.

Share your knowledge of this product. Be the first to write a review about this product »