Home > Audio & Video > Components > HDMI Products > Amplifiers/Convertors/Scalers/Splitters >

40-1096-IR Calrad HDMI Balun Plus IR over Single Coax Cable

Calrad 40-1096-IR HDMI Balun Plus IR over Single Coax Cable

Brand: Calrad Electronics

Product Code: CAD-40-1096-IR
Contact Us for Pricing & Availability


Calrad 40-1096-IR HDMI Balun Plus IR over Single Coax Cable

Calrad's HDMI & IR over Coax Extender provides HDMI 1080P signal & IR delivery over a single RG59 or RG6 coaxial cable as the transmission medium. The technology enables HDMI installation to be connected over long distances. Full High-Resolution HDTV signals are supported up to a resolution of 1080P at a maximum distance of 328 ft, see the cable distance table below. The built-in circuitry automatically compensates for different cable lengths and adjusts signal gain and equalization so no adjustments are required by the user. The IR receiver in the transmitter and receiver can work locally and remotely to switch between HDMI input 1 and input 2. Transmitters and receivers can be cascaded to easily expand the HDMI delivery system. Note! MUST USE BNC PERMA SEAL CONNECTORS •NO ADAPTERS•.

  • HDTV Resolutions: 480i, 480p, 720p, 1080i, 1080p (1.65 Gbps, HDMI High Spped)
  • Maximum Signal Rate: 10.2Gbps
  • Video Amplifier Frequency: 340 MHz
  • Up to 36bit Color Depth
  • Input Video Signal: 1.2 Volts p-p
  • Input DDC Signal: 5 Volts p-p (TTL)
  • Connector Type I: HDMI Type A 19-Pin Female
  • Connector Type II: BNC Female Type
  • DC Power Supply: 2 x 5V DC output, 2A
  • Weight: 0.62 lbs ea.

Share your knowledge of this product. Be the first to write a review about this product »