Tempo 915FS Optical Fusion SplicerThe 915FS touchscreen optical fusion splicer uses active cladding alignment technology which allows the technician to reliably fuse fiber optic cables with low splice losses. Active clad technology splicers provide a more cost effective splicing alternative to core alignment but still provides low splice losses which is ideally suited for FTTH installations. The intuitive user interface keeps the learning curve short and enables the technician to be productive in a very short time. FTTx, P2P installations, and all standard fibers are supported with pre-qualified splicing profiles that can be modified and subsequently stored for more demanding fiber applications. The 915FS uses the Tempo Splice on Connector, which provides a low loss, low return loss, and reliable connection that surpasses the failure prone mechanical connector. Splice on connectors also allow for easier fiber routing, which reduces fiber preparation since the splice on connector is pre-cleaved and also eliminates the need for a splice tray. The 915FS is available in the popular Contractor kit which bundles the fusion splicer, cleaver, an extra battery, and fiber strippers so that the technician has all of the tools they will need. Backed by 3-year warranty.
Applicable Fibers: SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF
Fiber Cleaved Length: 10mm
Cladding Diameter: 100 to 1000µm
Fiber Count: Single
Fiber Aligning Method: Active Clad
Splice Loss: (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF)
Splicing Mode: 60 Preset / User Definable Modes
Splice Time: 7 seconds
Boot Time; 5 seconds
Number of Splices Per Battery Charge: 200 (including 60mm heat shrink cycle)
Splice Connector: SC, LC, FC, ST
Arc Calibration Mode: Automatic & Manual
Protection Sleeve Length: 60mm, 40mm, Micro Sleeves
Ingress Protection; IP5X (Dust); IPX2 (Water)
Storage of Splice Results: 5,000 Results, 100 screenshots
Drop Test; 76cm on five axis
Tension Test: 2N
Fiber Display Magnification: 200x
Tube Heating Time: 18 seconds
Attenuator Mode; 0.1 to 15 dB
Electrode Life: 5,000 Splices
Display: 5" Color LCD Touchscreen
Connectivity: USB
Storage Temperature: -40 to +158F (-40 to +70C)
Operating Conditions: Pressure: 0 to 16,404 feet (0 to 5,000 meters) above Sea Level Humidity: 0 to 95% Temperature: -4 to +131F (-20 to +55C)
Power Supply: 100 to 240V AC Adapter; Li-ion Battery (4400 mAh)
Weight: 3.3lbs (1.5kg)
Dimensions; 4.9" x 4.9" x 5.3" (125 x 125 x 135mm)
Password Protection: Yes
|