Home > Shop by Brand > Paladin Tools > Fiber Optic Tools > Crimpers >

PA8019 - Fiber Optic CrimpALL Tool w/Die for SRF and SMF Type
Paladin Tools PA8019


 
Brand: Paladin Tools - Greenlee
Manufacturer Part No. PA8019
Product No Longer Available

Description
 
The Paladin PA8019 Fiber Optic CrimpALL crimp tool has four important ergonomic features that improve user satisfaction and job comfort:

1. An angled head prevents awkward wrist bending during operation.
2. Reduced handle grip distance is comfortable for workers with both small & large hands.
3. The higher crimp force is produced with a lower hand force so your hand doesn't get tired so quickly.
4. No breakover hand force, the effort required by most crimpers to make the last click at the end of the crimp, is required to complete the crimp.

Our standard die sets fit into the CrimpALL. Soft embedded-rubber handles make this crimp tool extremely comfortable to use. This tool is manufactured for a long life span using fine blanking technologies and a double-plated jaw assembly. A safety release is built-in. This world-class crimp tool is an exceptional value.
See crimp chart for specific connector and crimp dimensions.
  • Ergonomic design
  • Comfortable rubber-embedded handles
  • Less hand force needed to crimp connectors
  • Long-lasting tool that delivers over 50,000 crimp cycles
  • Ultra-smooth, fully-ratcheting cycle with built-in safety release
  • Rugged, double-plated jaw assembly
  • EZI-Change die screws make changing dies quick and easy and fixed die screws for tight spaces
  • Choose from complete tool with die set inserted or separate tool frame and individual die sets
Part Numbers Description/Crimp Sizes/Crimp Style Connector Manufacturer or Remarks
Tool & Die:
Die Only:		 8017
2652		 SMA, SMB, SFR, ST, SC Type
0.128" / 0.151" / 0.215" / 0.197" / 0.178" HEX
(3.2 / 3.83 / 5.46 / 5.0 / 4.52 mm)		 Universal for sleeves and ferrules,
SC, FC, SMA
Tool & Die:
Die Only:		 8018
2043		 SMA/FC Type
0.215" / 0.178" / 0.151" HEX
(5.46 / 4.52 / 3.83 mm)		 Crimps ferrules and sleeves only,
SMA, FC
Tool & Die:
Die Only:		 8019
2030		 SRF and SMF Type
0.190" / 0.160" / 0.132" RND
(4.83 / 4.06 / 3.35 mm)		 Crimps ferrules and sleeves
AMP (Tyco)
Tool & Die:
Die Only:		 8020
2654		 Lucent Technologies ST II Type
0.190" HEX / 0.105" RND / 0.090" RND
(4.83 / 2.67 / 2.3 mm)		 Crimps ferrules and sleeves
Lucent ST II
Tool & Die:
Die Only:		 8037
2669		 3M SC / FC-3
0.120" RND / 0.137" RND / 0.190" RND
(3.05 / 3.48 / 4.83 mm)		 Connectors with round crimp
3M SC / FC Type Fiber
Tool Die:
Die Only:		 8039
2685		 FC / SC / ST / LC / SMA / MT-RJ
0.151" / 0.178" HEX; LC RND / 0.190" RND
(3.83 / 4.52 / LC / 4.83 mm)		 Crimps 3M. SC / ST & Lucent / Krone LC,
SMA, FC, MT-RJ
LC RND dimension proprietary
Tool & Die:
Die Only:		 8050
2695		 AMP SC 2.0 / 2.5 / 3.0 mm
.110 / .125 / .140 / .191 RND		 Connectors with round crimp
AMP SC

Share your knowledge of this product. Be the first to write a review about this product »