Calrad 92-401-KIT-E LED Light Strip Kit, RGB 5 M. Reel, 3-Chip, 4 pin Male to Female connectors | Calrad Electronics

92-401-KIT-E Calrad Electronics | RGB 5 M. Reel, 3-Chip L.E.D. Light Strip with 4 pin Male to Female connectors, Kit

Suitable for Home, Retail and Commercial applications, Hotels, Bars, Restaurants, Kitchens, Furniture, Automobiles, Boats, Home Theaters, A-V Shelves and Cabinets, Equipment Racks, Accent lighting with thousands of possibilities. Please note! for indoor use only.

Specifications:

• AC Input Voltage\ Current: 100-240Vac, 50-60Hz, 0.6A
• Recommended DC Power Supply Voltage\Current for 1 Roll: Minimum 12 Vdc, 4 Amps
• Color: RGB 5050SMD L.E.D.’s
• Roll Current\ Size: Current draw 2.0 Amps, 5M/16.4 ft., width 10mm
• PCB Strip Lighting Color: Black
• Package: 1 x 5M RGB Lighting, IR Controller, 1 x 24 Button Remote, 1 x DC Power Supply

Installation:

1. Measure the surface area where the L.E.D. lighting strip is to be installed.
2. Cut the lighting to the desired length, see diagram 1A.
3. Clean the surface that the L.E.D. strip will be mounting to.
4. Peel the adhesive tape from the lighting strip making sure the 4 pin connector for power and control is located in the proper place so connectivity can occur to the L.E.D. controller. Note! observe the polarity arrows on both the male and female 4 pin connectors. Do not bend the lighting strip at a tight 90 degree radius.

NOTE: The Power Supply can ONLY Handle 1 Roll (16.4 ft), Calrad’s Model: 45-608. Want to Connect Multiple Rolls?

Calrad Electronics Part Number: 92-401-KIT-E