Submit search
Klein Tools MM325
Klein Tools MM400
Klein Tools MM700
This Klein Tools Voltage Tester with Laser Pointer provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems.
Klein Tools Part Number NCVT-5
The Klein Tools VDV500-820 Tone & Probe Pro Kit is designed to cater to both professional and home users. With its exceptional cable tracing capabilities, you can effortlessly trace cables spanning over 1,000 feet. With the VDV500-820 model the Bed of Nails clips ensure secure attachment to wires, while the RJ11 plug seamlessly connects to telephone and RJ45 data jacks, allowing you to tone wire pairs with utmost ease.
The Klein Tools voltage tester is non-contact tester with an integrated flashlight. The NCVT-3P voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.
Klein Tools Part Number NCVT-3P
This Klein Tools Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The ET310 Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester.
This Klein Tools NCVT-5A Voltage Tester is a Versatile Dual-Range Non-Contact Voltage Tester with Integrated Laser Pointer. The NCVT-5A volt tester offers two modes for detecting voltage: Mode 1 detects voltage from 70 to 1000V AC, while Mode 2 detects voltage from 12 to 1000V AC. With high-pitched audible alerts that increase in frequency as higher voltage is sensed or when proximity to the voltage source gets closer, you can rely on accurate and timely notifications. The laser pointer adds an extra level of convenience and can be used independently or simultaneously with the NCVT. Enjoy the peace of mind of the CAT IV 1000V safety rating.
Klein Tools Test Leads with Heavy-Duty Alligator Clips are intended for use as replacement test leads for meters that have banana-type input jacks. At 3 feet long, these right-angle test leads feature heavy-duty alligator clips to attach to wires and other conductors. They are part of a full line of Klein Tools meters and testers, designed by electricians for electricians.
Part Number: Klein Tools 69381
Klein Tools Non-Contact Voltage Tester detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires. A bright green LED indicates the tester is powered on. It changes to red and an audible tone sounds when voltage is detected.
Part Number Klein Tools NCVT-1P
This Klein Tools 69410 Replacement Test Lead Set is designed to replace Digital Multi-meters test leads equipped with standard, banana-type input jacks. Featuring detachable alligator clips, the 69410 leads effortlessly connect to wires and various conductors.
The Klein Tools ET920 is a USB Tester for USB-A and USB-C connections. This compact device allows you to continuously monitor voltage and current in the range of 3 to 20V DC with a current range of 0.05 to 3A (USB-A) or 0.05 to 5A (USB-C). With its advanced functionality, it can track up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated), providing you with valuable data for analysis and troubleshooting. The ET920 is specifically designed to test most common standard USB-A or USB-C ports, including Qualcomm Quick Charge® ports. Its hi-resolution LCD ensures clear visibility even in low ambient lighting environments. With durable cables, it allows for easy access to hard-to-reach ports. The rugged, pocket-sized, and lightweight Klein industrial design is built to withstand jobsite demands, including a 6.6-foot (2m) drop. The best part is, the ET920 doesn't require batteries as it is powered by the USB port being tested. Upgrade your testing capabilities with the Klein Tools ET920 and experience reliability, durability, and efficiency on every job.
Klein Tools MM300
