Fluke 179 ESFP True RMS Digital Multimeter

With its precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built-in temperature measurements.

You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy and high places you work. Backed by a lifetime warranty, the Fluke 179 is independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments.

Fluke builds the most trusted tools in the world, and that means more than just the Fluke 179. If you work with the HVAC equipment, need a small meter for small spaces, or work in the electrical installer's and repairman's world, check out the full family of Fluke digital multimeters.

Specifications
Voltage DC	Accuracy1	±(0.09% + 2)
	Max. resolution	0.1 mV
	Maximum	1000 V
Voltage AC	Accuracy1	±(1.0% + 3)
	Max. resolution	0.1 mV
	Maximum	1000 V
Current DC	Accuracy1	±(1.0% + 3)
	Max. resolution	0.01 mA
	Maximum	10 A
Current AC	Accuracy1	±(1.5% + 3)
	Max. resolution	0.01 mA
	Maximum	10 A
Resistance	Accuracy1	±(0.9% + 1)
	Max. resolution	0.1 Ω
	Maximum	50 MΩ
Capacitance	Accuracy1	±(1.2% + 2)
	Max. resolution	1 nF
	Maximum	10,000 µF
Frequency	Accuracy1	±(0.1% + 1)
	Max. resolution	0.01 Hz
	Maximum	100 kHz
Temperature	Accuracy1	±(1.0% + 10)
	Max. resolution	0.1°C
	Range	-40°C / 400°C
1. Accuracies are best accuracies for each function
Environmental Specifications
Operating temperature	-10°C to +50°C
Storage temperature	-30°C to +60°C
Humidity (without condensation)	0% – 90% (0°C – 35°C) 0% – 70% (35°C – 50°C)
Safety Specifications
Overvoltage category	EN 61010–1 to 1000 V CAT III EN 61010–1 to 600 V CAT IV
Agency approvals	UL, CSA, TÜV listed and VDE Pending
Mechanical and General Specifications
Size	43 x 90 x 185 mm
Weight	420 g
Warranty	Lifetime
Battery life	Alkaline ~200 hours typical, without backlight

• Manual and automatic ranging
• Display Hold and Auto Hold
• Frequency and capacitance measurements
• Resistance, continuity and diode measurements
• Temperature measurements (179)
• Min-max-average recording
• Closed case calibration through front panel
• Ergonomic case with integrated protective holster

Safety conformance

All inputs are protected to IEN61010-1 CAT IV 600 V/CAT III 1000 V., CSA, and TÜV listed