Powerbridge: Power bridge In-wall Power Soultion for HDTVs

Power Bridge ™ In-Wall Electrical Power Solution

Available in White, Black, Almond and Ivory.
Power Bridge pricing

PowerBridge Solution for HDTV is designed specifically for wall mounted HDTV Flat Screen Plasma, Flat Panel LCD, HDTV Home Theater / Data Projectors, and Subwoofers.

If you are wall mounting your HDTV Flat Screen Plasma, Flat Panel LCD HDTV, you need the PowerBridge Solution for HDTV. Meets National Electric Code requirements for in-wall electrical wiring. Don't risk damages installing the TV power cord in the wall.

PowerBridge Solution for HDTV is the most cost effective In-Wall Electrical Solution to protect expensive Home Theater HDTV equipment from surge damage and the best solution to provide clean A/C power when connected to a Power Surge/Conditioner.

Allows all connected Home Theater HDTV components on the same A/C electrical circuit, reducing interference and line noise from separate household A/C circuits and outlets.

PowerBridge Solution for HDTV can be installed, usually in 30 minutes, at the same time as the HDTV installation. Custom HDTV Installers throughout the country, offer PowerBridge Solution for HDTV installed at the same time as the HDTV installation, solving the issue of not wanting to see the TV power cord hanging down in front of the wall.

PowerBridge Solution for HDTV saves time and money compared to having to schedule an electrician to install a standard non-protected receptacle circuit.

PowerBridge Solution for HDTV can be wired to multiple receptacle outlets throughout the system or home, allowing all HDTV Audio and Video equipment to be power-protected through a single Power Surge Protection/Conditioning Console, saving hundreds of dollars in expensive multiple protection components.

Designed for Safety PowerBridge Solution for HDTV was innovated with safety as a top priority, designed with a unique RECESSED POWER-INLET Wall Plate. If the Power-cord is ever unplugged from the INLET, by anyone, especially a child, there are NO contact points to touch, eliminating risk of electrical shock. PowerBridge Solution for HDTV meets NEC Compliancy, when installed with NM type wire (ROMEX®).

Don't put yourself at risk; TV power cords or extension cords through the wall or ceiling, does not meet National and Local Building, Electrical and Fire Codes.



PowerBridge POWER OUTLET Installed at TV/Projector Location	PowerBridge POWER INLET Installed at Source Equipment/Surge Protector/Existing A/C Receptacle Location

Easy to Install
At the same time in routing the A/V cables between the HDTV and source equipment, running NM (non-metallic) type electrical wire, also known as ROMEX®, between the POWER INLET and POWER OUTLET and making simple secure screw connections on the back of each wall plate.
Kit does not include NM type wire-ROMEX® ; very inexpensive and can be purchased at most hardware and home supply stores by the foot or in 12', 25', 50' boxes, or larger reels.
NOTE: Some areas, local jurisdictions, may require using metal electrical boxes and jacketed metal electrical wire. It is advised to check with your specific local building jurisdiction as to any special code requirements. Metal boxes are not included, or optional with the PowerBridge kit, however the plate will fit within metal and new-work electrical boxes.

The PowerBridge™ kit comes with easy to follow instructions, with pictures, and wall cut-out template for the 2 Carlon® in-wall electrical boxes for retro-fit into the drywall. All you need is a drywall saw or sharp utility knife, and a screwdriver to install the electrical boxes.

PowerBridge Solution for HDTV can be installed vertically or horizontally, to assure concealment behind the HDTV and alignment around the TV wall mount.

Safe to Install
PowerBridge Solution for HDTV is designed as a plug-in electrical device to an existing grounded A/C outlet or surge protector.

During installation, there is never any direct contact with electricity or live electrical circuits. NO direct wire branching of electrical wiring to, or, from the electrical circuit, back of an existing outlet or house power panel. Direct wired only between the POWER INLET and POWER OUTLET wall plates.

After the wall plates are installed, the POWER OUTLET receptacle is energized by simply plugging in the supplied 36" PowerCord female end to the POWER INLET and the male end to the A/C power source, such as a surge protector or nearby existing A/C outlet.

*IMPORTANT PRODUCT INFORMATION*
THIS PRODUCT IS NOT TO BE HARD-WIRED DIRECTLY TO AN ELECTRICAL CIRCUIT. IT IS DESIGNED AS AN ELECTRICAL PLUG-IN DEVICE TO AN EXISTING A/C GROUNDED OUTLET ONLY.

THIS PRODUCT IS RATED FOR USE WITH AN EXISTING OUTLET 15-AMP 125V GROUNDED CIRCUIT ONLY.

Check with your Local Building Jurisdiction, as to permit or code requirements for installing electrical wire and outlets within a wall.

This product does not have built-in electronic circuitry for, surge protection or A/C filtering.
It is recommended this product be plugged into a quality surge-protector/power conditioner.

If you are not skilled with running wires through walls; it is strongly recommended, a qualified installation professional should install this product.

MANUFACTURER IS NOT LIABABLE FOR ANY DAMAGES DUE TO IMPROPER INSTALLATION

REQUIRED FOR INSTALLATION (NOT SUPPLIED)
ELECTRICAL WIRE (ROMEX) 3 CONDUCTOR 12-2 or 14-2 type UL approved wire.
ROMEX wire can be purchased at most home supply or hardware stores.

TOOLS REQUIRED
Stud Finder ~ Tape measure ~ Pencil ~ Small Level ~ Drywall Saw/Sharp Utility Knife ~ Phillips head and flat blade screwdriver ~ Wire-stripper ~ Needle Nose Pliers ~ Electrical Outlet Tester

Package includes:

Recessed Plug-in A/C Power Outlet (Available in Single or Dual)
Safety-Designed Recessed Plug-in A/C Power Inlet
36" Power Cord
In-Wall PVC Electrical Boxes