|
ShortStop
QuickStart
Instructions
for using the ShortStop for the first time
-
Install four (4) AA
cells in the battery compartment located on the back of the unit.
-
To avoid possible electric
shock, insure that nothing is connected to the input connector before removing
the battery door.
-
To remove the battery
door, push the lip towards the top of the unit and lift the door off.
-
Observe correct polarity
when inserting the batteries.
-
Re-install the battery
door prior to connecting anything to the input connector.
-
Turn the unit on by
pressing the center button.
-
Attach the male BNC
connector of the alligator clip adapter to the female BNC input connector
on the unit and clip the leads to the conductors on the cable you are testing.
-
That's
all there there is to it!
-
The ShortStop Cable
Fault Finder performs a self-test every time you power it on, and auto
adjusts its test parameters to each cable you connect to it.
|
